HP 5800 Series User Manual

223
Reply from 100.1.2.1: bytes=100 Sequence=2 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=3 time = 62 ms
Reply from 100.1.2.1: bytes=100 Sequence=4 time = 62 ms
--- FEC: FEC 128 PSEUDOWIRE (NEW) 3.3.3.9 301 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 31/55/62 ms
pw-class
Description
Use the pw-class command to create a PW class template, and enter PW class template view.
Use the undo pw-class command to delete an existing PW class template.
By default, no PW class template is created.
Syntax
pw-class pw-class-name
undo pw-class pw-class-name
View
System view
Default level
2: System level
Parameters
pw-class-name: Specifies the name of the PW class template, which is a case-insensitive string of 1 to 19
characters.
Examples
# Create PW class template pw100 and enter its view.
<Sysname> system-view
[Sysname] pw-class pw100
[Sysname-pw-pw100]
pwsignal
Description
Use the pwsignal command to specify the PW signaling protocol for VPLS to use, and enter VSI LDP view
(Martini mode) or VSI BGP view (Kompella mode).
Syntax
pwsignal { bgp | ldp }
View
VSI view

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)