HP 5800 Series

225
reset bgp vpls
Description
Use the reset bgp vpls command to reset a specific VPLS BGP connection or all VPLS BGP connections.
Syntax
reset bgp vpls { as-number | ip-address | all | external | internal }
View
User view
Default level
2: System level
Parameters
as-number: Resets VPLS BGP connections to peers in a specified AS. The as-number parameter is ranging
from 1 to 4,294,967,295.
ip-address: Resets the VPLS BGP connection to a specified peer.
all: Resets all VPLS BGP connections.
external: Resets VPLS EBGP session.
internal: Resets VPLS IBGP session.
Examples
# Reset all VPLS BGP connections.
<Sysname> reset bgp vpls all
reset mac-address vsi
Description
Use the reset mac-address vsi command to clear the MAC address table of a specified VPLS instance or
all VPLS instances.
Syntax
reset mac-address vsi [ vsi-name ]
View
User view
Default level
1: Monitor level
Parameters
vsi-name: Specifies the name of a VPLS instance, which is a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
Examples
# Clear the MAC address table of VPLS instance aaa.
<Sysname>reset mac-address vsi aaa