HP 5800 Series User Manual

243
Field Description
Local ccc vc Number of local CCC connections
Remote ccc vc Number of remote CCC connections
Name Name of the CCC connection
Type Type of the CCC connection
State Status of the CCC connection
Intf Interface of the CCC connection
In-label Incoming label
Out-label Outgoing label
Nexthop IP address of the next hop
display l2vpn ccc-interface vc-type
Description
Use the display l2vpn ccc-interface vc-type command to display information about specified L2VPN VC
interfaces.
Syntax
display l2vpn ccc-interface vc-type { all | bgp-vc | ccc | ldp-vc | static-vc } [ up | down ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all CCC interfaces, regardless of the VC type.
bgp-vc: Specifies CCC interfaces with the VC type of Kompella.
ccc: Specifies CCC interfaces with the VC type of CCC.
ldp-vc: Specifies CCC interfaces with the VC type of Martini.
static-vc: Specifies CCC interfaces with the VC type of SVC.
up: Specifies CCC interfaces in the state of UP.
down: Specifies CCC interfaces in the state of DOWN.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)