HP 5800 Series User Manual

362
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] filter-policy 2555 export
filter-policy import (BGP-VPNv6 subaddress family view)
Description
Use the filter-policy import command to filter received routes.
Use the undo filter-policy import command to remove the configuration.
By default, received routes are not filtered.
Only routes that survive the filtering are added into the BGP routing table.
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
BGP-VPNv6 subaddress family view
Default level
2: System level
Parameters
acl6-number: Specifies the IPv6 ACL number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies an IPv6 address prefix list by its name, which is a string of 1 to 19
characters.
Examples
# In BGP-VPNv6 subaddress family view, use ACL 2555 to filter received routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpnv6
[Sysname-bgp-af-vpnv6] filter-policy 2255 import
import route-policy
Description
Use the import route-policy command to apply an import routing policy to a VPN instance, an IPv4 VPN
or an IPv6 VPN.
Use the undo import route-policy command to remove the application.
By default, all routes permitted by the import target attribute are accepted.
You can specify an import routing policy when the route redistribution control provided by the extended
community attributes is not enough.
• An import routing policy specified in VPN instance view is applicable to both the IPv4 VPN and the
IPv6 VPN.
• An import routing policy specified in IPv6 VPN view is applicable to only the IPv6 VPN.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)