HP 5800 Series User Manual

34
BGP Local router ID is 30.30.30.30.1
Status codes: * - valid, ^ - VPN best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*^ i Network : 30:30:: PrefixLen : 64
NextHop : ::FFFF:101:102 LocPrf : 100
PrefVal : 0 Label : 1025
MED : 0
Path/Ogn: ?
Table 13 Command output
Field Description
BGP Local router ID Router ID of the local BGP router
Status codes Route status codes
Origin Route origin codes
Network Destination network address
PrefixLen Prefix length of the destination network address
NextHop IPv6 address of the next hop
LocPrf Local preference value
PrefVal Preference value of the route
Label Received label
MED Metric associated with the destination network
Path/Ogn AS_PATH attribute/route origin of the route
display bgp vpnv6 vpn-instance peer
Description
Use the display bgp vpnv6 vpn-instance peer command to display information about the IPv6 BGP peers
in the specified VPN instance.
If you do not specify any optional parameters, the command displays the brief information of all IPv6
BGP peers.
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: M o n i t o r

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)