HP 5800 Series User Manual

39
display ipv6 fib vpn-instance
Description
Use the display ipv6 fib vpn-instance command to display the IPv6 FIB information of the specified VPN.
If you do not specify any optional parameters, the command displays all IPv6 FIB information of the VPN.
Syntax
display ipv6 fib vpn-instance vpn-instance-name [ acl6 acl6-number | ipv6-prefix ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the VPN instance name, which is a case-sensitive string of 1 to 31
characters.
acl6 acl6-number: Displays the IPv6 FIB information of the VPN instance permitted by the specified ACL.
acl6-number is the number of the ACL, ranging from 2000 to 2999. If the specified ACL does not exist,
the command displays all IPv6 FIB information of the VPN instance.
ipv6-prefix ipv6-prefix-name: Displays the IPv6 FIB information of the VPN instance permitted by the
specified prefix list. ipv6-prefix-name is the name of the IPv6 prefix list, which is a case-sensitive string of
1 to 19 characters. If the specified IPv6 prefix list does not exist, the command displays all IPv6 FIB
information of the VPN instance.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all IPv6 FIB information of VPN instance vpn1.
<Sysname> display ipv6 fib vpn-instance vpn1
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : UH
Label : Null Token : Invalid
Interface : InLoopBack0

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)