HP 5800 Series User Manual

216
display vsi remote
Description
Use the display vsi remote command to display information about remote VPLS connections using a
specified signaling protocol.
Related commands: vsi.
Syntax
display vsi remote { bgp | ldp } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
bgp: Displays information about remote VPLS connections using the signaling protocol of BGP.
ldp: Displays information about remote VPLS connections using the signaling protocol of LDP.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about remote VPLS connections using LDP.
<Sysname> display vsi remote ldp
Vsi Peer VC Group Vsi MTU Vsi
ID RouterID Label ID Type Value Index
500 60.1.1.1 524688 0 vlan 1500 0
Table 88 Command output
Field Description
Vsi ID ID of the VPLS instance
Peer Router ID ID of the peer
VC Label Label of the VC
Group ID ID of the group
Vsi Type Encapsulation type of the VPLS instance
MTU Value Maximum transmission unit
Vsi Index Index of the VPLS instance

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)