HP 5800 Series User Manual

54
Table 20 Command output
Field Description
In Label Incoming label
In Interface Incoming interface
VSI Index VPLS instance index
Link ID Link ID of a PW in the VPLS instance
Operation Operation type, which can be POP, POPGO, SWAPGO, or NULL
Swap Label Label for swapping
Out Interface Outgoing interface
Service Instance ID L2VPN service instance ID
Create Time Time when the entry was created
Last Change Time Time of the last update of the entry
Tunnel ID
Public tunnel ID and entry status (Done or Waiting)
GrCount: Number of times that GR occurs
display mpls interface
Description
Use the display mpls interface command to display MPLS information about one or all interfaces with
MPLS enabled.
Related commands: display mpls statistics interface and mpls.
Syntax
display mpls interface [ interface-type interface-number ] [ verbose ] [ include text | { | { begin | exclude
| include } regular-expression } ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)