HP 5800 Series User Manual

53
Total ILM Entry: 2
Inlabel In-Interface Token VRF-Index Oper LSP-Type Swap-Label
--------------------------------------------------------------------------
1024 Vlan2 2 0 POP NORMAL ----
1025 Vlan3 3 0 SWAPGO NORMAL 1026
Table 19 Command output
Field Description
Total ILM Entry Total number of ILM entries
Inlabel Incoming label
In-Interface Incoming interface
Token NHLFE entry index
Oper
Operation type, which can be POP, POPGO,
SWAPGO, or NULL
Swap-Label Label for swapping
# Display the detailed information of all ILM entries.
<Sysname> display mpls ilm verbose
Total ILM Entry: 2
**In Label : 60
LSP Type : STATIC LSP
In Interface : Vlan2
VRF Index : 0
Operation : NULL
Swap Label :
Out Interface :
Create Time : 07:55:06:921
Last Change Time : 07:55:06:921
Tunnel ID : 0xc0001(Done)
GrCount: 0
**In Label : 80
LSP Type : STATIC LSP
In Interface : Vlan3
VRF Index : 0
Operation : NULL
Swap Label :
Out Interface :
Create Time : 07:57:26:927
Last Change Time : 07:57:26:927
Tunnel ID : 0xc0002(Done)
GrCount: 0

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)