HP 5800 Series

75
Field Description
Source IP
IP address of the active end (ingress LSR) of the BFD
session
Session Role
Role of the current LSR in the session, Active or Passive
• Active—Initiator of the BFD session
• Passive—Responder of the BFD session
display mpls lsp statistics
Description
Use the display mpls lsp statistics command to display LSP statistics.
Syntax
display mpls lsp statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256
characters.
Examples
# Display LSP statistics.
<HP>display mpls lsp statistics
Lsp Type Total Ingress Transit Egress
STATIC LSP 1 1 0 0
STATIC CRLSP 0 0 0 0
LDP LSP 0 0 0 0
CRLDP CRLSP 0 0 0 0
RSVP CRLSP 0 0 0 0
BGP LSP 0 0 0 0
ASBR LSP 0 0 0 0
BGP IPV6 LSP 0 0 0 0
-------------------------------------------------------------------------
LSP 0 0 0 0
CRLSP 1 1 0 0