HP 5800 Series User Manual

11
display fib vpn-instance
Description
Use the display fib vpn-instance command to display the FIB information of a VPN.
If you do not specify a parameter, all FIB information for the VPN is displayed.
Syntax
display fib vpn-instance vpn-instance-name [ acl acl-number | ip-prefix ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the instance name of a VPN, which is a case-sensitive string of 1 to 31
characters.
acl acl-number: Displays the FIB information of the VPN instance permitted by the specified ACL. acl-
number is the number of the ACL, ranging from 2000 to 2999. If the specified ACL does not exist, the
command displays all FIB information of the VPN instance.
ip-prefix ip-prefix-name: Displays the FIB information of the VPN instance permitted by the specified IP
prefix. ip-prefix-name is the name of the IP prefix, which is a case-sensitive string of 1 to 19 characters. If
the specified IP prefix does not exist, the command displays all FIB information of the VPN instance.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all FIB information of the VPN instance vpn1.
<Sysname> display fib vpn-instance vpn1
FIB entry count: 4
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination/Mask Nexthop Flag OutInterface InnerLabel Token
10.2.0.0/16 10.2.1.1 U Eth1/1 Null Invalid
10.2.1.1/32 127.0.0.1 UH InLoop0 Null Invalid
127.0.0.0/8 127.0.0.1 U InLoop0 Null Invalid
127.0.0.1/32 127.0.0.1 UH InLoop0 Null Invalid
# Display the FIB information of VPN instance vpn1 that begins with the line containing the string 127.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)