HP 5800 Series User Manual

258
l2vpn
Description
Use the l2vpn command to enable L2VPN and enter L2VPN view.
Use the undo l2vpn command to disable L2VPN.
By default, L2VPN is disabled.
Syntax
l2vpn
undo l2vpn
View
System view
Default level
2: System level
Parameters
None
Examples
# Enable L2VPN and enter L2VPN view.
<Sysname> system-view
[Sysname] l2vpn
[Sysname-l2vpn]
l2vpn-family
Description
Use the l2vpn-family command to enter BGP L2VPN address family view.
Use the undo l2vpn-family command to delete all configurations for the BGP L2VPN address family.
Syntax
l2vpn-family
undo l2vpn-family
View
BGP view
Default level
2: System level
Parameters
None
Examples
# Enter BGP L2VPN address family view.
<Sysname> system-view
[Sysname] bgp 100

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)