HP 5800 Series

333
export: Performs a soft reset in the outbound direction.
import: Performs a soft reset in the inbound direction.
Examples
# Perform a soft reset of all BGP connections in VPN instance vpn1 in the inbound direction to make new
configurations take effect.
<Sysname> refresh bgp vpn-instance vpn1 all import
refresh bgp vpnv4
Description
Use the refresh bgp vpnv4 command to perform a soft reset of BGP VPNv4 connections.
Syntax
refresh bgp vpnv4 { ip-address | all | external | group group-name | internal } { export | import }
View
User view
Default level
1: Monitor level
Parameters
ip-address: Performs a soft reset of the BGP VPNv4 connection with a BGP peer identified by this IP
address.
all: Performs a soft reset of all BGP VPNv4 connections.
external: Performs a soft reset of EBGP sessions.
group group-name: Performs a soft reset of the VPNv4 connections with a BGP peer group identified by
this name.
internal: Performs a soft reset of IBGP sessions.
export: Performs a soft reset in the outbound direction.
import: Performs a soft reset in the inbound direction.
Examples
# Perform a soft reset of all BGP VPNv4 connections in the inbound direction to make new configurations
take effect.
<Sysname> refresh bgp vpnv4 all import
reserve-vlan (VPN Instance view)
Description
Use the reserve-vlan command to specify a reserved VLAN for an L3VPN instance.
The specified VLAN must be a nonexistent VLAN. Otherwise, L3VPN service data cannot be forwarded
properly.
If this command line is available, after you create a VPN instance, you need to specify a reserved VLAN
for the VPN instance before you configure other parameters for the VPN instance. Once established, the
association between a VPN instance and its reserved VLAN cannot be removed. To reestablish an