HP 5800 Series User Manual

86
du-readvertise
Description
Use the du-readvertise command to enable label re-advertisement for DU mode.
Use the undo du-readvertise command to disable the function.
By default, label re-advertisement is enabled in DU mode.
Syntax
du-readvertise
undo du-readvertise
View
MPLS LDP view, MPLS LDP VPN instance view
Default level
2: System level
Parameters
None
Examples
# Enable DU mode label re-advertisement for the public network LDP instance.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] du-readvertise
# Enable DU mode label re-advertisement for LDP instance vpn1.
<Sysname> system-view
[Sysname] mpls ldp vpn-instance vpn1
[Sysname-mpls-ldp-vpn-instance-vpn1] du-readvertise
du-readvertise timer
Description
Use the du-readvertise timer command to set the interval for label re-advertisement in DU mode.
Use the undo du-readvertise timer command to restore the default.
By default, the interval for label re-advertisement in DU mode is 30 seconds.
Syntax
du-readvertise timer value
undo du-readvertise timer
View
MPLS LDP view, MPLS LDP VPN instance view
Default level
2: System level

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)