HP 5800 Series - Display Ip Vpn-Instance

298
Examples
# Display the FIB information of VPN instance vpn1 that matches the destination IP address 10.2.1.1.
<Sysname> display fib vpn-instance vpn1 10.2.1.1
FIB entry count: 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination/Mask Nexthop Flag OutInterface InnerLabel Token
10.2.1.1/32 127.0.0.1 UH InLoop0 Null Invalid
For information about the command output, see Table 127.
display ip vpn-instance
Description
Use the display ip vpn-instance command to display information about a VPN instance or all VPN
instances.
If you do not specify any parameter, the command displays brief information about all VPN instances.
Syntax
display ip vpn-instance [ instance-name vpn-instance-name ] [ | { begin | exclude | include } regular-
expression ]
View
Any view
Default level
1: Monitor level
Parameters
instance-name vpn-instance-name: Displays information about the specified VPN instance. vpn-instance-
name represents the VPN instance name, which is a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all VPN instances.
<Sysname> display ip vpn-instance
Total VPN-Instances configured : 2
VPN-Instance Name RD Create Time
vpn1 22:1 2003/10/13 09:32:45
vpn2 33:3 2003/10/13 09:42:59