HP 5800 Series

335
reset bgp vpn-instance dampening
Description
Use the reset bgp vpn-instance dampening command to clear the route flap dampening information of a
VPN instance.
Syntax
reset bgp vpn-instance vpn-instance-name dampening [ network-address [ mask | mask-length ] ]
View
User view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the name of the VPN instance, which is a case-sensitive string of 1 to 31
characters.
network-address: Specifies the network address.
mask: Specifies the network mask, in the format of X.X.X.X.
mask-length: Specifies the length of the network mask, ranging from 0 to 32.
Examples
# Clear the route flap dampening information of VPN instance vpn1.
<Sysname> reset bgp vpn-instance vpn1 dampening
reset bgp vpn-instance flap-info
Description
Use the reset bgp vpn-instance flap-info command to clear the route flap history information about BGP
peers of a VPN instance.
Syntax
reset bgp vpn-instance vpn-instance-name ip-address flap-info
reset bgp vpn-instance vpn-instance-name flap-info [ ip-address [ mask | mask-length ] | as-path-acl as-
path-acl-number | regexp as-path-regexp ]
View
User view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the name of the VPN instance, which is a string of 1 to 31 characters.
ip-address: Specifies the IP address of the BGP peer.
mask: Specifies the network mask, in the format of X.X.X.X.
mask-length: Specifies the length of the network mask, ranging from 0 to 32.