HP 5800 Series

204
Field Description
Flag
Current status of the label
0x0001 (BGP_VPLS_LB_NOT_SENTTO_VPLS)
0x0002 (BGP_VPLS_LB_SENTTO_VPLS)
0x0004 (BGP_VPLS_LB_SELECTED)
0x0008 (BGP_VPLS_LB_ASBR_TNLDOWN)
0x0010 (BGP_VPLS_LB_FROM_RR_IBGP)
0x0020 (BGP_VPLS_LB_FROM_RR_EBGP)
0x0040 (BGP_VPLS_LB_FROM_IBGP)
0x0080 (BGP_VPLS_LB_FROM_EBGP)
0x0085 (BGP_VPLS_LB_NOT_SENTTO_VPLS |
BGP_VPLS_LB_SELECTED |
BGP_VPLS_LB_FROM_EBGP)
LB Offset Label offset value
LB Size Label size
LB Base Initial label of the label base
LB NewBase New label base
RefCount Label reference count
MED Cost value
AS Path AS path of the route
MTU Maximum transmission unit at Layer 2
Encap Type Encapsulation type
display mac-address vsi
Description
Use the display mac-address vsi command to display the MAC address table information of a specified
VPLS instance or all VPLS instances.
Related commands: vsi; mac-address (Layer 2—LAN Switching Command Reference).
Syntax
display mac-address vsi [ vsi-name ] [ blackhole | dynamic | static ] [ count ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vsi-name: Specifies the name of the VPLS instance, which is a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
blackhole: Specifies the black hole MAC forwarding entries.