32
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display all BGP VPNv6 routing information.
<Sysname> display bgp vpnv6 all routing-table
BGP Local router ID is 30.30.30.30.1
Status codes: * - valid, ^ - VPN best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 1
Route Distinguisher: 100:1
*^ i Network : 30:30:: PrefixLen : 64
NextHop : ::FFFF:101:102 LocPrf : 100
PrefVal : 0 Label : 1024
MED : 0
Path/Ogn: ?
Total routes of vpn-instance vpn1: 1
*^> Network : 30:30:: PrefixLen : 128
NextHop : ::FFFF:101:102 LocPrf : 100
PrefVal : 0 Label : 1024
MED : 0
Path/Ogn: ?
Table 11 Command output
Field Description
BGP Local router ID Router ID of the local BGP router
Status codes Route status codes
Origin Route origin codes
Total number of routes from all PE Total number of VPNv6 routes from all PEs
Network Destination network address
PrefixLen Prefix length of the destination network address
NextHop IPv6 address of the next hop
LocPrf Local preference value
PrefVal Preference value of the route
Label Received label
MED Metric associated with the destination network
To Next Page
Loading...
Need help?
General
