HP 5800 Series User Manual

142
Parameters
area-id: Specifies the area ID. For OSPF, it ranges from 0 to 4,294,967,295. For IS-IS, it takes the value of
1 or 2.
ip-address: Specifies the IP address of an interface.
network-lsa: Displays TEDB information in network LSAs.
node: Displays the TEDB information on nodes. If you do not specify a node, the TEDB information on all
nodes is displayed.
mpls-lsr-id: Specifies a node by its MPLS LSR ID.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80 characters.
Examples
# Display TEDB information in network LSAs.
<Sysname> display mpls te cspf tedb network-lsa
Maximum Network LSA Supported: 2048
Current Total Network LSA Number: 2
Id DR MPLS LSR-Id DR-Address IGP Process-Id Area Neighbor
1 104.4.4.4 45.1.1.4 OSPF 1 0 105.5.5.5
104.4.4.4
2 104.4.4.4 45.1.1.4 ISIS 1 Level-2 104.4.4.4
105.5.5.5
Table 61 Command output
Field Description
ID Number
DR MPLS LSR-Id MPLS LSR ID of the DR
DR-Address Interface address of the DR
IGP Interior gateway protocol: OSPF or IS-IS
Process-Id IGP process ID
Area Area to which the router belongs
Neighbor Neighbor router ID
# Display all TEDB information.
<Sysname> display mpls te cspf tedb all
Maximum Node Supported: 128 Maximum Link Supported: 2048
Current Total Node Number: 4 Current Total Link Number: 4
Id MPLS LSR-Id IGP Process-Id Area Link-Count
1 104.4.4.4 OSPF 1 0 1
2 105.5.5.5 OSPF 1 0 1

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English