HP 5800 Series User Manual

151
Explicit Path Name : -
Tie-Breaking Policy : None
Metric Type : None
Record Route : Disabled Record Label : Disabled
FRR Flag : Disabled BackUpBW Flag: Not Supported
BackUpBW Type : - BackUpBW : -
Route Pinning : Disabled
Retry Limit : 10 Retry Interval: 10
Reopt : Disabled Reopt Freq : -
Back Up Type : None
Back Up LSPID : -
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
Tunnel Group : Secondary
Primary Tunnel : 120
Backup Tunnel : -
Group Status : -
Oam Status : -
Table 70 Command output
Field Description
Tunnel Desc Tunnel description
Tunnel State Desc Tunnel state description
Admin State Administrative state
Oper State Operation state
Signaling Prot Signaling protocol
Resv Style Reservation style
Class Type Service class type
Setup Priority Setup priority of LSP
Hold Priority Hold priority of LSP
Affinity Prop/Mask Affinity attribute and mask
Tie-Breaking Policy Path selection policy
Record Route State of the route recording function
Record Label State of the label recording function
FRR Flag FRR flag
BackUpBW Flag Backup bandwidth flag
BackUpBW Type Backup bandwidth type

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)