HP 5800 Series User Manual

206
Syntax
display mpls l2vpn fib ac vpls [ vsi vsi-name | interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vsi vsi-name: Specifies the VPLS instance name, which is a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
interface interface-type interface-number: Specifies the interface connecting a CE by its type and number.
service-instance service-instanceid: Specifies a service instance. The service-instanceid parameter is the
service instance ID, ranging from 1 to 4094.
verbose: Displays the detailed information.
slot slot-number: Displays the VPLS AC information on a member device in the IRF virtual device. The slot-
number parameter is the member number of the device in the IRF virtual device. The value range for the
slot-number parameter depends on the number of members and numbering conditions in the current IRF
virtual device.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the VPLS AC information.
<Sysname> display mpls l2vpn fib ac vpls
Total VSI Entry:1 Total AC Entry:1
In Interface ServID VSIName VSIIndex LinkID
------------------------------------------------------------
GigabitEthernet1/0/1 1000 vsi1 1 1
Table 80 Command output
Field Description
Total VSI Entry
Total number of VSI entries, which is displayed only when
you display all VPLS AC entries
Total AC Entry
Total number of VPLS AC entries, which is displayed only
when you display all VPLS AC entries
In Interface Incoming interface—the interface bound to an L2VPN
ServID Service instance ID

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)