HP 5800 Series User Manual

239
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Address family L2VPN: advertised and received
Received: Total 26 messages, Update messages 2
Sent: Total 28 messages, Update messages 2
Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 15 seconds
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 91 Command output
Field Description
Peer IP address of the peer
Local IP address of the local router
Type BGP type
BGP current state Current status of the BGP session
BGP current event Current event of the BGP session
BGP last state Last status of the BGP session
Port Local and remote ports used by the BGP session
Configured Settings of the local timers
Received Settings of the remote timers
Negotiated Negotiated settings of the timers
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Optional peer capabilities, including the support for
BGP multicast protocol extension and the support for
BGP route refreshing
Address family IPv4 Unicast IPv4 unicast address family capability
Address family L2VPN L2VPN address family
Received
Total number of received messages and that of
received update messages
Sent
Total number of sent messages and that of received
update messages
Maximum allowed prefix number Maximum number of routes allowed
Threshold Threshold value
BFD Whether BFD is enabled for the peer
Routing policy configured Routing policy specified for the peer

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)