245
Default level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting the CE by its type and
number.
service-instance instance-id: Specifies a service instance by its ID, which ranges from 1 to 4094.
remote-info: Specifies Martini VCs from the remote peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all Martini VCs configured on the router.
<Sysname> display mpls l2vc
Total ldp vc : 2 0 up 2 down
Transport Client Service VC Local Remote
VC ID Intf ID State VC Label VC Label
100 Vlan2 -- down 1027 --
200 Vlan2 -- down 1028 --
Table 97 Command output
Field Description
Total ldp vc Total number of Martini VCs
Transport VC ID Remote VC ID
Client Intf Interface connected with the CE
# Display information about Martini VC configured using service instance 100 on interface Vlan-interface
2.
<Sysname> display mpls l2vc interface vlan-interface 2 service-instance 100
***VC ID : 10000000
VC State : up
Destination : 1.1.1.1
Client Intf : Vlan-interface 2 is up
Service instance ID : 100
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1029
Remote VC Label : 1029
Tunnel Policy : default
Tunnel Type : lsp
To Next Page
Loading...
