HP 5800 Series User Manual

248
Field Description
mtu Maximum transmission unit
ce(L) Number of local CEs
ce(R) Number of remote CEs
# Display information about L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1
***VPN name : vpn1
Encap type : vlan
Local ce number(s) : 0
Remote ce number(s) : 0
Route distinguisher : 100:2
MTU : 1500
Import vpn target : 111:1
Export vpn target : 111:1
Table 102 Command output
Field Description
VPN Name Name of the VPN
Encap type Encapsulation type
Local ce number(s) Number of local CEs
Remote ce number(s) Number of remote CEs
MTU Maximum transmission unit
Import vpn target Incoming VPN target
Export vpn target Outgoing VPN target
# Display information about local CEs of L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1 local-ce
ce-name ce-id range conn-num LB
ce1 1 10 0 132096/0/10
LB stands for label block
Table 103 Command output
Field Description
ce-name Name of the CE
ce-id CE number
range CE range
conn-num Number of connections
LB Label block
# Display information about remote CEs of L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1 remote-ce
no. ce-id peer-id route-distinguisher LB

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)