HP 5800 Series User Manual

251
Local ce-id : 1
Local ce name : ce1
Remote ce-id : 4
Intf(state,encap) : Vlan-interface 2 (up,ethernet)
Peer id : 3.3.3.9
Route-distinguisher : 100:1
Local vc label : 132100
Remote vc label : 132097
Tunnel policy : policy1
Tunnel Type : lsp
Tunnel ID : 0x226013
Table 106 Command output
Field Description
Conn-type Type of the connection
Local vc state Local VC status
Remote vc state Remote VC status
Local ce-id ID of the local CE
Local ce name Name of the local CE
Remote ce-id ID of the remote CE
Intf(state,encap)
Interface name (interface status, interface
encapsulation type)
Peer id IP address of the peer
Local vc label Local VC label
Remote vc label Remote VC label
Tunnel policy Name of the tunneling policy
Tunnel type Type of the tunnel
Tunnel ID ID of the tunnel
# Display summary information about all Kompella L2VPN connections.
<Sysname> display mpls l2vpn connection summary
1 total connections,
connections: 1 up, 0 down , 0 local, 1 remote, 0 unknown
No. vpn-name local-num remote-num unknown-num up-num total-num
1 vpn1 0 1 0 1 1
Table 107 Command output
Field Description
connections
Statistics about connections, including the number of
connections in the state of Up, the number of
connections in the state of Down, the number of
local connections, the number of remote
connections, and the number of unknown
connections

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)