282
Table 118 Command output
Field Description
Peer IP address of the peer.
Local IP address of the local router.
Type BGP type.
BGP version Version of BGP that the peer runs.
remote router ID Router ID of the remote router.
BGP current state Current status of the BGP session.
Up for Duration since the peer is established.
BGP current event Current event of the BGP session.
BGP last state
State that the BGP session was in before
transitioning to the current status.
Port Local and remote ports of the BGP session.
Configured
Settings of the local timers, including the active hold
interval and keepalive interval.
Received Received active hold interval.
Negotiated Negotiated active hold interval.
Peer optional capabilities Optional capabilities of the peer.
Peer support bgp multi-protocol extended The peer supports multiprotocol extension.
Peer support bgp route refresh capability The peer supports route refresh capability.
Address family IPv4 Unicast IPv4 unicast family capability.
Received
Counts of received messages and received update
messages.
Sent Counts of sent messages and sent update messages.
Maximum allowed prefix number
Maximum number of routes that the VPN instance
supports.
Threshold Threshold value.
Optional capabilities Local optional capabilities.
ORF advertise capability based on prefix (type 64):
ORF address prefix capability is supported. The
capability value is 64.
Local
Indicates whether the local device supports sending
and receiving Route-refresh packets with ORF
information. The value can be:
• both—Supports sending and receiving Route-
refresh messages with ORF information.
• send—Supports sending Route-refresh messages
with ORF information.
• receive—Supports receiving Route-refresh
messages with ORF information.
To Next Page
Loading...
Need help?
General
