288
network-address: Specifies the IP address of the destination segment.
mask: Specifies the network mask, in the format of X.X.X.X.
mask-length: Specifies the length of the network mask, ranging from 0 to 32.
as-path-acl as-path-acl-number: Filters routing information using the specified AS_PATH list. The as-path-
acl-number parameter ranges from 1 to 256.
cidr: Displays CIDR information.
community: Displays routing information of the specified BGP community in the routing table.
aa:nn&<1-13>: Specifies the community number. Both the aa and nn parameters ranging from 0 to
65,535. &<1-13> means that you can enter the parameter combination up to 13 times.
no-advertise: Specifies a route with this attribute is not advertised to any other BGP peer.
no-export: Specifies a route with this attribute is not advertised out of the local AS or, if existing, the
confederation. However, it is advertised to the other sub-ASs in the confederation.
no-export-subconfed: Specifies a route with this attribute is not advertised out of the local AS or to the
other sub-ASs in the confederation.
whole-match: Performs exact matching.
community-list: Displays routing information of the specified BGP community list.
basic-community-list-number: Specifies the basic community list number, ranging from 1 to 99.
adv-community-list-number: Specifies the advanced community list number, ranging from 100 to 199.
&<1-16>: Specifies that the parameter before it can be entered up to 16 times.
different-origin-as: Displays information about routes with different AS origins.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
regular-expression as-regular-expression: Displays routing information matching the specified AS regular
expression.
Examples
# Display the BGP VPNv4 routing information of RD 100:1.
<Sysname> display bgp vpnv4 route-distinguisher 100:1 routing-table
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Route Distinguisher: 100:1
Total number of routes: 2
To Next Page
Loading...
