HP 5800 Series

290
Table 123 Command output
Field Description
BGP Local router ID Router ID of the local BGP router.
Status codes Route status codes. For valid values, see Table 113.
Origin Route status codes. For valid values, see Table 113.
Network Network address.
NextHop Address of the next hop.
In/Out Label Incoming/outgoing label.
MED Metric associated with the destination network.
LocPrf Local preference.
Total routes of vpn-instance vpn1 Total number of routes of the specified VPN instance
Paths
Counts of routes, including:
• available—Number of available routes.
• best—Number of best routes
Label information
Route label information
• Received—Received label information
• Applied—Locally generated label information
Ext-Community Extended community attribute
AS-path
The route’s AS path attribute (AS_PATH), which
records all ASs the route has passed to avoid route
loops
Attribute value BGP routing attribute information
localpref Local preference value
pref-val Preference value of the route
pre Protocol priority
State
Current state of the peer, which can be:
• valid
• internal
• best
# Display the BGP VPNv4 routing information with RD being 100:1 and the network segment address
being 10.0.0.0.
<Sysname> display bgp vpnv4 route-distinguisher 100:1 routing-table 10.0.0.0 255.0.0.0
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Route Distinguisher: 100:1
Total number of routes: 1