HP 5800 Series User Manual

302
area area-id: Specifies an OSPF area by the area ID, which can be an integer ranging from 0 to
4,294,967,295 or in the format of an IPv4 address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display information about all OSPF sham links.
<Sysname> display ospf sham-link
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area NeighborId Source-IP Destination-IP State Cost
0.0.0.1 120.1.1.2 3.3.3.3 5.5.5.5 P-2-P 10
Table 131 Command output
Field Description
Area OSPF area to which the sham link belongs
NeighborId Router ID of the sham link neighbor
Source-IP Source IP address of the sham link
Destination-IP Destination IP address of the sham link
State Status of the sham link interface
Cost Cost of the sham link
# Display information about OSPF sham links in area 1.
<Sysname> display ospf sham-link area 1
OSPF Process 100 with Router ID 100.1.1.2
Sham-Link: 3.3.3.3 --> 5.5.5.5
Neighbor ID: 120.1.1.2 State: Full
Area: 0.0.0.1
Cost: 10 State: P-2-P Type: Sham
Timers: Hello 10, Dead 40, Retransmit 5, Transmit Delay 1
Table 132 Command output
Field Description
Sham-Link
Sham link expressed in the format of source IP
address to destination IP address
Neighbor ID Router ID of the sham link neighbor

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)