HP 5800 Series User Manual

354
Field Description
AS AS number of the peer
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages to be sent to the peer
PrefRcv Number of prefixes received
Up/Down Duration of the BGP session in the current state
State Current state of the peer
# Display detailed information about the IPv6 BGP peers in the VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 peer verbose
BGP Peer is 2001::1, remote AS 200,
Type: EBGP link
BGP version 4, remote router ID 2.2.2.2
BGP current state: Established, Up for 00h00m54s
BGP current event: RecvUpdate
BGP last state: OpenConfirm
Port: Local - 179 Remote - 1024
Configured: Active Hold Time: 180 sec Keepalive Time: 60 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec Keepalive Time:60 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv6 Unicast: advertised and received
Received: Total 4 messages, Update messages 2
Sent: Total 6 messages, Update messages 3
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 141 Command output
Field Description
BGP Peer IPv6 address of the BGP peer.
remote AS AS number of the peer.
Type BGP type.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)