HP 5800 Series User Manual

356
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name routing-table [ network-address prefix-length [ longer-
prefixes ] | peer ipv6-address { advertised-routes | received-routes } ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the VPN instance name, which is a case-sensitive string of 1 to 31
characters.
network-address: Specifies the IPv6 address of the destination network segment.
prefix-length: Specifies the length of the prefix, ranging from 0 to 128.
longer-prefixes: Displays each routing entry that meets the following conditions:
• Its destination IPv6 address ANDed with the specified prefix equals the specified destination IPv6
address ANDed with the specified prefix.
• Its prefix length is shorter than or equal to the specified prefix length.
• Its prefix length is the longest among the entries meeting the above two conditions.
peer ipv6-address: Displays the routing information sent to or received from the specified BGP VPNv6
peer. ipv6-address is the IPv6 address of the peer.
advertised-routes: Displays the routing information sent to the specified peer.
received-routes: Displays the routing information received from the specified peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the BGP VPNv6 routing information of VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 routing-table
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPN best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total routes of vpn-instance vpn1: 1
*^> Network : 324:: PrefixLen : 64
NextHop : 100::2 LocPrf : 100
PrefVal : 0 Label : NULL

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)