HP 5800 Series

359
Syntax
display ipv6 fib vpn-instance vpn-instance-name ipv6-address [ prefix-length ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Specifies the VPN instance name, which is a case-sensitive string of 1 to 31
characters.
ipv6-address: Specifies the destination IPv6 address.
prefix-length: Specifies the prefix length of the destination IPv6 address, ranging from 0 to 128.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the IPv6 FIB information with the destination address of ::1 in the VPN instance vpn1.
<Sysname> display ipv6 fib vpn-instance vpn1 ::1
FIB Table:
Total number of Routes : 1
Flag:
U:Useable G:Gateway H:Host B:Blackhole D:Dynamic S:Static
Destination: ::1 PrefixLength : 128
NextHop : ::1 Flag : UH
Label : Null Token : Invalid
Interface : InLoopBack0
Table 144 Command output
Field Description
Total number of Routes Total number of matched routes in the FIB