HP 5800 Series User Manual

57
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
• begin: Displays the first line that matches the specified regular expression and all lines that follow.
• exclude: Displays all lines that do not match the specified regular expression.
• include: Displays all lines that match the specified regular expression.
• regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 80
characters.
Examples
# Display all information about LDP in detail.
<Sysname> display mpls ldp all verbose
LDP Global Information
---------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information
---------------------------------------------------------------
Instance ID : 0 VPN-Instance :
Instance Status : Active LSR ID : 1.1.1.1
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode: Ordered Label Retention Mode : Liberal
-----------------------------------------------------------------
Table 22 Command output
Field Description
Protocol Version Version of the LDP protocol.
Neighbor Liveness Setting of the GR neighbor liveness timer.
Graceful Restart Whether GR is enabled.
FT Reconnect Timer Setting of the GR’s FT reconnect timer.
MTU Signaling
Whether MTU signaling is supported. The device
does not support MTU signaling.
Recovery Timer Setting of the GR’s recovery timer.
Instance ID Sequence number of the LDP instance.
VPN-Instance
Name of the LDP-enabled VPN instance. For the
default instance, nothing is displayed.
Hop Count Limit Maximum hop count for loop detection.
Path Vector Limit Maximum path vector length.
Loop Detection Whether loop detection is enabled.
DU Re-advertise Timer Label re-advertisement interval for DU mode.

HP 5800 Series Specifications

General

MAC Address Table Size	32, 000 entries
Uplink Ports	2 or 4 SFP+ 10GbE ports
Routing Protocol	BGP, IS-IS
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 95% (noncondensing)
PoE	Optional
Power Supply	Redundant power supply (optional)