HP 5800 Series User Manual

68
Peer-ID Status LAM SsnRole FT MD5 KA-Sent/Rcv
--------------------------------------------------------------------------
1.1.1.1:0 Operational DU Active Off Off 4582/4582
--------------------------------------------------------------------------
LAM : Label Advertisement Mode FT : Fault Tolerance
Table 29 Command output
Field Description
Peer-ID
LDP identifier of the peer. See Table 24 for detailed
desc
ription of LDP ID.
Status
Session status, including:
• Non Existent: The TCP connection is not
established yet.
• Initialized: The TCP connection is established.
• Open-Received: Received an acceptable
initialization message.
• Open-Sent: Sent an initialization message.
• Operational: The LDP session is established.
SsnRole
Role of the current LSR in the session, Active or
Passive.
KA-Sent/Rcv
Counts of keepalive messages sent by/received on
the local LSR.
# Display detailed information about all public network LDP sessions.
<Sysname> display mpls ldp session verbose
LDP Session(s) in Public Network
--------------------------------------------------------------------------
Peer LDP ID : 1.1.1.1:0 Local LDP ID : 3.3.3.3:0
TCP Connection : 3.3.3.3 -> 1.1.1.1
Session State : Operational Session Role : Active
Session FT Flag : Off MD5 Flag : Off
Reconnect Timer : --- Recovery Timer : ---
Negotiated Keepalive Timer : 45 Sec
Keepalive Message Sent/Rcvd : 6/6 (Message Count)
Label Advertisement Mode : Downstream Unsolicited
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism : Extended
Session existed time : 000:00:01 (DDD:HH:MM)
LDP Extended Discovery Source : Remote peer: 1
Addresses received from peer: (Count: 2)
10.1.1.1 1.1.1.1
--------------------------------------------------------------------------
Peer LDP ID : 2.2.2.2:0 Local LDP ID : 3.3.3.3:0
TCP Connection : 3.3.3.3 -> 2.2.2.2

HP 5800 Series Specifications

General

Brand	HP
Model	5800 Series
Category	Switch
Language	English