SYSTEM
IMENU)
Description
This
softkey
lets you set the swept signal generator’s sweep time to
a minimum value for a chosen span and meet all specifications. The
sweep time is limited by a 300
MHz/ms
sweep rate. An asterisk next
to the key label indicates this feature is active.
Programming Codes
SCPI: SWEep:TIME:AUTO
ONlOFFlllO
Analyzer: NONE
See Also
(-TIME)
“Power Level and Sweep Time Operation” in Chapter 1
SYSTEM
@iii]
Function Group
SYSTEM
Menu Map
8
Description
This
hardkey
reveals the system menu.
Alternate Regs
Dim Display
Disp Status
HP-IB Menu
Preset Mode Factory
Preset Mode User
Ref Osc Menu
Save User Preset
Security
Menu
Causes the swept signal generator to
alternate on successive sweeps between
the present instrument state and a
second instrument state stored in an
internal register.
Dims the swept signal generator’s
display.
Displays the present status of the swept
signal generator.
Reveals the HP-IB control menu.
Sets the preset state, as defined by the
manufacturer, to be recalled by the
(PRESET)
key.
Sets the preset state, as defined by the
user, to be recalled by
(-1.
Reveals the frequency standard options
menu.
Stores the present instrument state in a
special preset storage register.
Reveals the menu that controls the
security features of the swept signal
generator.
Operating and Programming Reference S-77
To Next Page
Loading...
Need help?
General
