Tracking
Nenu
10
MHz
Freq
Std
None
Function Group
SYSTEM
Menu Map
8
Description
This
softkey
sets the reference oscillator to a free-run state, where
no frequency reference is used. An asterisk next to the key label
indicates that this feature is active.
Programming Codes
SCPI: ROSCillator[:SOURce] NONE
Analyzer: NONE
See Also
Ref
Osc Menu
Tracking
Menu
Function Group
POWER, USER CAL
Menu Map
5,9
Description
In the menu structure there are two occurrences of this softkey. One
occurs in the POWER
[MENU),
the other occurs in the USER CAL
(MENU).
Both softkeys operate the same way. These softkeys access
the tracking menu.
Auto Track
Realigns the swept signal generator’s output
filter and oscillator to maximize output power
for the swept frequency mode.
Peak RF Always
Periodically realigns the swept signal
generator’s output filter and oscillator to
maximize output power for the CW frequency
mode.
Peak RF Once
Realigns the swept signal generator’s output
filter and oscillator to maximize output power
for the CW frequency mode.
Operating and Programming Reference T-3
To Next Page
Loading...
