Tracking
Menu
Programming Codes
SCPI: NONE
Analyzer: NONE
See Also
Softkeys listed above.
“Using the Tracking Feature” in Chapter 1
TrigOut
Delay
Function Group
SWEEP
Menu Map
7
Description
This softkey lets you specify the amount of time after phase-lock
before a trigger pulse is sent out of the TRIGGER OUTPUT BNC.
The delay can be set from 0 to 3.2 seconds. An asterisk next to the
key label indicates this feature is active.
Programming Codes
SCPI: TRIGger:ODELay <num>[time suffix]
Analyzer: NONE
See Also
Start Sweep Trigger Auto, Start Sweep Trigger BUS,
Start Sweep Trigger Ext
T-4 Operating and Programming Reference
To Next Page
Loading...
