1. Log in to the DC SAN Director as admin:
rsl8-st03-dcx-1:admin> login
login: admin
password: xxxxxxxx
rsl8-st03-dcx-1:admin>
2. Type slotShow command and verify that all the installed cards are detected and that their status
is operational (enabled).
rsl8-st03-dcx-1:admin> slotShow
Slot Blade Type ID Status
---------------------------------
1 UNKNOWN VACANT
2 UNKNOWN VACANT
3 SW BLADE 55 ENABLED
4 UNKNOWN VACANT
5 CORE BLADE 52 ENABLED
6 CP BLADE 50 ENABLED
7 CP BLADE 50 ENABLED
8 CORE BLADE 52 ENABLED
9 UNKNOWN VACANT
10 SW BLADE 55 ENABLED
11 UNKNOWN VACANT
12 UNKNOWN VACANT
rsl8-st03-dcx-1:admin>
Replacing DC SAN Director field-replaceable units (FRUs)106
To Next Page
Loading...
