HP Aruba JL253A - Lldp Config; Show Commands

[no] lldp config all basicTlvEnable management_addr
lldp config
Syntax
lldp config <port-number>
Description
Configure the lldp for the desired port by number.
Parameter
basicTlvEnable
Enables the basic advertised TLV for each port by number.
Options
<management_addr>
Use the option <management_addr> to specify specific devices to enable TLV advertisement.
Usage
lldp config <port_num> basicTlvEnable <management_addr>
Show commands
Use the command show running-config to view the lldp configuration.
Example
switch# show running-config
Running configuration:
...
no lldp config 1 basicTlvEnable management_addr
Example
switch# show lldp config 1
LLDP Port Configuration Detail
Port : 1
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
TLVS Advertised:
* management_addr
IpAddress Advertised:
256 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08