HP Aruba JL253A - Show Command Device-Profile Status

show device-profile config
Switch# Show device-profile config
Device Profile Configuration
Configuration for device-profile : default-ap-profile
untagged-vlan : 1
tagged-vlan : None
ingress-bandwidth : 100%
egress-bandwidth : 100%
cos : None
speed-duplex : auto
poe-max-power : Class/LLDP
poe-priority : critical
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
show device-profile config profile1
Switch(device-profile)# show device-p config test
Device Profile Configuration
Configuration for device-profile : profile1
untagged-vlan : 1
tagged-vlan : None
ingress-bandwidth : 100%
egress-bandwidth : 100%
cos : None
speed-duplex : auto
poe-max-power : Class/LLDP
poe-priority : critical
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
show command device-profile status
Syntax
show device-profile [config | status]
Description
Displays the device-profile configuration or device-profile status.
Options
config
Show device profile configuration details for a single profile or all profiles.
status
Show currently applied device profiles status.
show device-profile status
Switch# show device-profile status
Chapter 21 Simplifying Wireless and IoT Deployments 717