HP Aruba JL253A - Show Device-Profile Status

Configuration for device-profile : default-scs-profile
untagged-vlan : 1
tagged-vlan : None
ingress-bandwidth : 100%
egress-bandwidth : 100%
cos : None
speed-duplex : auto
poe-max-power : Class/LLDP
poe-priority : critical
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
Configuration for device-profile : default-device-profile
untagged-vlan : 1
tagged-vlan : None
ingress-bandwidth : 100%
egress-bandwidth : 100%
cos : None
speed-duplex : auto
poe-max-power : Class/LLDP
poe-priority : critical
allow-jumbo-frames : Disabled
allow-tunneled-node: Enabled
Device Profile Association
Device Type : aruba-ap
Profile Name : default-ap-profile
Device Status : Disabled
Device Type : aruba-switch
Profile Name : default-aos-profile
Device Status : Disabled
Device Type : scs-wan-cpe
Profile Name : default-scs-profile
Device Status : Disabled
show device-profile status
Syntax
show device-profile status
Description
Shows the profile status of the device.
Command context
config
Example
Use the show decive-profile status command to view status.
switch(confg)# show device-profile status
Port Device-type Applied device profile
-------- -------------------- ----------------------
A1 <device-name> abc
Chapter 21 Simplifying Wireless and IoT Deployments 719