HP Aruba JL253A - Snmp Mib

Syntax:
show fault-finder broadcast-storm [[ethernet] port-list]
Examples:
switch# show fault-finder broadcast-storm [A1]
Port Bcast Storm Port Status Rising
Threshold
Action Disable
Timer
Disable
Timer Left
A1 Yes Down 10% warn-and-
disable
65535 —
switch (config)# show fault-finder broadcast-storm
Port Bcast Storm Port Status Rising
Threshold
Action Disable
Timer
Disable
Timer Left
A1 Yes Down 200 pps warn-and-
disable
10 9
switch (config)# show fault-finder broadcast-storm A1
Port Bcast Storm Port Status Rising
Threshold
Action Disable
Timer
Disable
Timer Left
A1 No Up — none — —
switch (config)# show fault-finder broadcast-storm
Port Bcast Storm Port Status Rising
Threshold
Action Disable
Timer
Disable
Timer Left
A1 Yes Up 75% warn — —
SNMP MIB
SNMP support will be provided through the following MIB objects:
hpicfFfBcastStormControlPortConfig OBJECT IDENTIFIER
:: = { hpicfFaultFinder 5 }
hpicfFfBcastStormControlPortConfigTable OBJECT-TYPE
• syntax sequence: HpicfFfBcastStormControlPortConfigEntry
• max-access: not-accessible
• status: current
• description: This table provides information about broadcast storm control configuration of all ports.::=
{hpicfFfBcastStormControlPortConfig 1}
hpicfFfBcastStormControlPortConfigEntry OBJECT-TYPE
Chapter 3 Port Status and Configuration 81