The address is highlighted if found. If the switch does not find the address, it leaves the MAC address listing
empty.
3. Press [P] (for Prev page) to return to the previous per-port listing.
MSTP data
show spanning-tree
Syntax
show spanning-tree
Description
Displays the global and regional spanning-tree status for the switch, and displays the per-port spanning-tree
operation at the regional level.
Values for the following parameters appear only for ports connected to active devices: Designated Bridge,
Hello Time, PtP, and Edge.
Chapter 12 Monitoring and Analyzing Switch Operation 401
To Next Page
Loading...
