<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range of 1 to 8.
Example
For show power-over-ethernet vsf member 4:
Switch# show power-over-ethernet vsf member 4
Status and Counters - System Power Status for member 4
Maximum Power : 370 W Operational Status : On
Power In Use : 0 W +/- 6 W Usage Threshold (%) : 80
show system information
Syntax
show system information [vsf member <MEMBER-ID>]
Description
Show global configured and operational system parameters. If VSF is enabled, this shows the system information
for all VSF members.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to
8.
Example
switch(config)# show system information
vsf Show global configured and operational system parameters
of the specified VSF members.
switch(config)# show system information
Status and Counters - General System Information
System Name : Aruba-VSF-2930F
System Contact :
System Location :
MAC Age Time (sec) : 300
Time Zone : 0
Daylight Time Rule : None
Software revision : WC.16.06.0000x
Base MAC Addr : f40343-f8368a
VSF-Member :1
ROM Version : WC.16.01.0004
Up Time : 35 days
CPU Util (%) : 0
MAC Addr : f40343-f83680
Serial Number : CN76HKX16H
Memory - Total : 343,482,880
Free : 253,575,488
Chapter 20 Virtual Switching Framework (VSF) 677
To Next Page
Loading...
