HP Aruba JL253A - [No] Ip-Sla ID History-Size; [No] Ip-Sla ID Icmp-Echo; [No] Ip-Sla ID Udp-Echo; [No] Ip-Sla ID Tcp-Connect

Options
records
Clear history records, message statistics, and threshold counters of particular SLA entry.
[no] ip-sla <ID> history-size
Syntax
[no] ip-sla <ID> history-size
Description
Configure the number of history records to be stored for the IP SLA. The maximum supported size is 50 and the
default value for history-size is 25.
[no] ip-sla <ID> icmp-echo
Syntax
[no] ip-sla <ID> icmp-echo [<IP-ADDR> | <HOST-NAME>] [source <IP-ADDR>
| source-interface vlan <VLAN-ID>] [payload-size <SIZE>]
Description
Configure ICMP echo as the IP SLA test mechanism. Requires destination address/hostname and source
address/vlan id for the IP SLA of ICMP-Echo SLA type.
payload-size
: Value can range from 1-1440. By default, payload-size is not set.
[no] ip-sla <ID> udp-echo
Syntax
[no] ip-sla <ID> udp-echo [destination [<IP-ADDR> | <HOST-NAME>]
<PORT-NUM>] [source <IP-ADDR> | <VLAN-ID>] [payload-size <SIZE>]
Description
Configure UDP echo as the IP SLA test mechanism. Requires destination address/hostname and source address/
VLAN ID for the IP SLA of UDP-Echo SLA type.
• PORT-NUM: Value can range from 1024–65535.
• payload-size: Value can range from 1-1440. By default, payload-size is not set.
[no] ip-sla <ID> tcp-connect
Syntax
[no] ip-sla <ID> tcp-connect [destination [<IP-ADDR> | <HOST-NAME>]
<PORT-NUM>] [source [<IP-ADDR> | <VLAN-ID>] <PORT-NUM>]
Description
Configure TCP connect as the IP SLA test mechanism. Requires destination address/hostname and source
address/VLAN ID for the IP SLA of TCP connect SLA type. The value of PORT-NUM can range from 1024-65535.
590 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08