HP Aruba JL253A - Copy Core-Dump; Copy Crash-Log; Copy Fdr-Log

copy core-dump
Copy core-dump from the specified VSF member. User can copy available core-dump file from interface module
or management module.
Syntax
copy core-dump vsf member <MEMBER-ID> <SLOT-ID> | mm-active sftp | tftp | usb |
xmodem <HOST-NAME-STR> | <IP-ADDR> | <IPV6-ADDR> <FILENAME-STR>
Description
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to 8.
Parameters
<MEMBER-ID>
Specify the VSF member.
<SLOT-ID>
Copy interface module core-dump file.
copy fdr-log
Copy FDR (Flight data recorder) logs. User can either copy from management module or interface module or
both.
Syntax
copy fdr-log vsf member <MEMBER-ID> all | mm-active sftp | tftp | usb | xmodem <HOST-NAME-STR> | <IP-ADDR> | <IPV6-ADDR> <FILENAME-STR>
Description
Copy FDR logs from the switch to an SFTP/TFTP server, USB, or xmodem terminal.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to
8.
copy crash-log
Syntax
copy crash-log vsf member <MEMBER-ID> | <SLOT-ID-RANGE> | mm | sftp | tftp | usb |
xmodem sftp | tftp | usb | xmodem <HOST-NAME-STR> | <IP-ADDR> | <IPV6-ADDR>
<FILENAME-STR>
Description
Copy the switch log file.
Parameters
<MEMBER-ID>
The VSF member-ID for the member command or parameter. Member ID value can be in the range from 1 to
8.
<SLOT-ID-RANGE>
Enter the single slot identifier.
686 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08