HP Aruba JL253A - Clear Ip-Sla Responder Statistics

========== IP SLA show tech END ==============
======== IP SLA Server show tech BEGIN ============
Responder not active
IP SLA Responder: Inactive
======== IP SLA Server show tech END ============
=== The command has completed successfully. ===
clear ip-sla responder statistics
Syntax
clear ip-sla responder statistics <SLA-TYPE> <LOCAL-IP-ADDR> <LOCAL-PORT-NUM>
source <SOURCE-IP-ADDR>
Description
Clear IP SLA responder statistics for either UDP jitter or VoIP UDP jitter.
Command context
config
Parameters
<SLA-TYPE>
Specifies the SLA type.
udp-jitter
Selects standard UDP jitter.
udp-jitter-voip
Selects UDP VOIP jitter.
<LOCAL-IP-ADDR>
Specifies the local interface IP address
<LOCAL-PORT-NUM>
Specifies the local interface port number. Range: 1024 to 65535.
<SOURCE-IP-ADDR>
Specifies the Source IP address.
Examples
Clear IP SLA responder statistics for UDP jitter:
switch(config)# clear ip-sla responder statistics udp-jitter 1.1.1.1 1100 source 1.1.1.2
600 Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08