HP Aruba JL253A - [No] Ip-Sla ID Udp-Jitter-Voip; Show Commands; Show Ip-Sla ID

• Payload-size: Payload size of the test packet. Value can range from 68-8100. Default value is 68.
• Num-of-packets: Number of packets sent in one probe. Default is 10. Allowed range: 10-1000.
• Packet-interval: Inter packet gap in milliseconds.Time between consecutive packets within a probe. Default is
20ms. Allowed range: 10-60000
[no] ip-sla <ID> udp-jitter-voip
Syntax
[no] ip-sla <ID> udp-jitter-voip destination [<IP-ADDR> | <HOST-NAME>] <PORT-NUM>
source [<IP-ADDR> | <VLAN-ID>] [codec-type <CODEC-TYPE> advantage-factor <ADV-
FACTOR>]
Description
Configures the UDP Jitter for VoIP test.
• Codec-type: Codec to be used to encode the test VoIP packets. Available codecs: g711a, g711u, g729a.
Default is g711a.
• Advantage-factor: Advantage factor to be configured for the test. Default is 0. Allowed range: 0-20.
Show commands
show ip-sla <ID>
Syntax
show ip-sla <ID>
Description
Show IP SLA configurations.
Options
history
Show the IP SLA results history.
message-statistics
Show the IP SLA message statistics.
results
Show the IP SLA results for UDP Jitter and UDP Jitter VoIP.
aggregated-results
Show the IP SLA aggregated results for UDP Jitter and UDP Jitter VOIP.
show ip-sla <ID>
SLA ID: 1
Status: [Enabled | Admin-disabled | Scheduled | Expired | Running]
SLA Type: [ICMP-echo | tcp-connect | UDP-echo | DHCP | DNS | udp-jitter | voip]
Destination Hostname: www.arubanetworks.com
Destination Address : 20.0.0.2
Chapter 17 IP Service Level Agreement 593