Table 8-10 Status Summary General Page Description
DescriptionField
The current power state (ON/OFF/STANDBY) of the system and the corresponding
power LED state.
System Power
The most recent entry in the SEL.Latest SEL Entry
Displays the current firmware revisions for iLO MP, BMC, EFI, system firmware, PDH,
UCIO, PRS, and PMPIC for entry class server blades.
Firmware Revisions
The IP address of the iLO 2 subsystem.iLO 2 MP IP Address
Displays the date and time as known to the iLO 2.Date & Time
Displays the status of the blue locator or UID LED and enables you to turn the Locator
LED on or off.
Note: The system's (Yellow) attention LED, which is separate from the locator LED, is
lit automatically if a Warning event is present in the SEL. To clear the attention LED,
read the SEL.
Locator UID LED
Status Summary > Active Users
The Active Users page (Figure 8-3) displays information about the users currently logged in to
the iLO 2.
NOTE: Depending on your server, this page might look slightly different.
Figure 8-3 Status Summary Active Users Page
NOTE: The BL c-Class tab is available only on HP Integrity server blades.
Table 8-11 lists the fields and descriptions.
Web GUI 111
To Next Page
Loading...
Need help?
General