HP Integrity BL870c User Manual

Telnet Examples
The following examples show specific Telnet commands.
Enable Telnet Service
</>-> start /map1/telnetsvc1
Disable Telnet Service
</>-> stop /map1/telnetsvc1
SSH
This section describes targets, their properties, and supported verbs necessary to enable or disable
SSH access to iLO 2.
Target: map1/sshsvc1
The sshsvc1 target represents the SSH service provided by map1.
Table 8-44 shows sshsvc1 target properties.
Table 8-44 sshsvc1 Properties
Access and ValuesDescriptionProperty Name
Read-only
The following are valid values:
Enabled, Disabled
Shows whether SSH service is enabled or
disabled.
EnabledState
Read-only
Set to SSH.
The protocol this service provides.Protocol
Verbs
start Enables iLO 2 SSH service.
stop Disables iLO 2 SSH service.
show Displays information.
help Displays context-sensitive help.
SSH Examples
The following examples show specific SSH commands.
Enable SSH Service
</>-> start /map1/sshsvc1
Disable SSH Service
</>-> stop /map1/sshsvc1
Network Configuration
Network commands enable you to display or modify network settings.
SM CLP Network Targets, Properties, and Verbs
This section describes targets, target properties, and supported verbs necessary to implement
the iLO 2 network configuration through SM CLP.
Target: map1/enetport1
The enetport1 target represents capabilities and management of the iLO 2 MP Ethernet port.
Table 8-45 shows enetport1 target information.
166 Using iLO 2

HP Integrity BL870c Specifications

General

Brand	HP
Model	Integrity BL870c
Category	Server
Language	English